Different result CST and OpenEMS

How to use openEMS. Discussion on examples, tutorials etc

Moderator: thorsten

Post Reply
Blinky
Posts: 1
Joined: Tue 29 Sep 2020, 09:22

Different result CST and OpenEMS

Post by Blinky » Tue 29 Sep 2020, 09:42

Hi

As I am new in the usage of openEMS I wanted to test an antenna I already designed in CST Studio Suite.

This antenna is made out of 2 metal sheets placed on top of eachother with a thickness of 0.254mm. The antenna is shown in the image.

Image

The antenna is designed to resonate at 2.45GHz with a bandwidth of 200MHz. However if I design the same antenna with the same dimensions in OpenEMS i become a resonance that is shifted to 2.3GHz and a bandwidth of 150MHz

For this test in OpenEMS I am using the script from the simple patch tutorial (https://openems.de/index.php/Tutorial:_ ... tenna.html) but with different dimensions for the patch.

Does someone know an explanation and maybe a solution?

Kind regards

Hale_812
Posts: 173
Joined: Fri 13 May 2016, 02:54

Re: Different result CST and OpenEMS

Post by Hale_812 » Fri 02 Oct 2020, 01:55

mesh, airbox dimensions, excitation setup, boundaries... check your script in that order.

Post Reply